thin-film cascadable amplifier 500 to 2000 mhz technical data features ? frequency range: 500 to 2000 mhz ? high dynamic range ? noise figure: 3.0 db (typ) ? gaas fet technology ? temperature compensated ? surface mount option applications ? system front end ? surface mount assembly description the 2012 series is a thin-film gaas fet rf amplifier using active bias and resistive feedback for stability over temperature and bias voltage variations. input/output blocking capacitors couple rf through the amplifier while a low vswr is maintained through inductive tuning. the 2012 series amplifiers are available in three packages: the surface mount planarpak pp-38 (.375 in. x .375 in.) case, the to-8 hermetic case and the connectorized tc-1 case. uto/utc 2012 series pin configuration utoto-8u ground case ground v + rf out rf in utctc-1 rf v + in rf out schematic maximum ratings parameter maximum dc voltage +17 volts continuous rf input power +15 dbm operating case temperature C55 to +125 c storage temperature C62 to +150 c r series burn-in temperature +125 c thermal characteristics 1 q jc 100 c/w active transistor power dissipation 250 mw junction temperature above case temperature 25 c mtbf (mil-hdbk-217e, a uf @ 90 c) 299,200 hrs. weight: (typical) ppa0.5 grams; uto2.1 grams; utc 21.5 grams rf out rf in v+ free datasheet http:///
2 electrical specifications 1 (measured in 50 w system @ +15 vdc nominal unless otherwise noted) symbol unit t c = e55 to +85 c 500-2000 8.5 1.0 4.5 +11.0 2.0:1 2.0:1 ? ? ? ? mhz db db db dbm ? ? dbm dbm dbm ma t c = 0 to 50 c guaranteed specifications typical t c = 25 c 500-2000 11.0 0.5 3.0 +14.0 <1.6:1 <1.6:1 +23.0 +33.0 +39.0 50 500-2000 9.0 1.0 4.0 +12.0 2.0:1 2.0:1 ? ? ? ? characteristic frequency range small signal gain (min.) gain flatness (max.) noise figure (max.) power output @ +1 db comp. (min.) input vswr (max.) output vswr (max.) two tone 3rd order intercept point two tone 2nd order intercept point one tone 2nd order intercept point dc current bw gp ? nf p 1db ? ? ip 3 ip 2 hp 2 i d typical performance over temperature (@ +15 vdc unless otherwise noted) key: +25 c +85 c -55 c 12.5 gain, db 0 gain frequency, mhz 12.0 500 1000 11.5 1500 noise figure, db frequency, mhz noise figure 4.0 3.0 2.0 1.0 11.0 500 800 1100 1700 1400 2000 2000 10.5 10.0 0.0 vswr input vswr frequency, mhz vswr output vswr frequency, mhz hp 2 , dbm second-harmonic intercept point frequency, mhz 1.75 1.50 ip 2 , dbm second-order intercept point frequency, mhz 500 third-order intercept point frequency, mhz power output frequency, mhz 800 +19.0 +17.0 1400 1100 1700 ip 3 , dbm power output, dbm 1.25 +15.0 1.00 +50.0 +13.0 0 500 1000 2000 1500 +40.0 +30.0 +20.0 2000 2.00 1.75 1.50 1.25 1.00 2.00 0 500 1000 2000 1500 500 800 1100 1700 1400 2000 +50.0 +40.0 +30.0 +20.0 +50.0 +40.0 +30.0 +20.0 500 800 1400 1100 1700 2000 +11.0 500 800 1400 1100 1700 2000 note 1: rf input pin is at dc groundno input blocking capacitor. free datasheet http:///
3 automatic network analyzer measurements frequency vswr gain phase phase group delay vswr isolation mhz in db degrees dev ns out db numerical readings bias = 15.00 volts 500.0 1.32 10.66 170.30 9.46 .57 1.41 16.35 600.0 1.20 10.65 151.64 3.72 .49 1.45 16.60 700.0 1.11 10.59 134.99 e.02 .44 1.51 16.84 800.0 1.03 10.59 119.69 e2.41 .40 1.56 17.02 900.0 1.03 10.57 105.49 e3.71 .39 1.61 17.15 1000.0 1.06 10.67 92.93 e3.37 .33 1.62 17.34 1100.0 1.05 10.57 81.00 e2.40 .34 1.55 17.48 1200.0 1.05 10.54 68.30 e2.21 .34 1.46 17.57 1300.0 1.05 10.51 56.10 e1.51 .34 1.36 17.48 1400.0 1.06 10.49 43.58 e1.13 .34 1.30 17.46 1500.0 1.06 10.48 31.45 e.37 .35 1.30 17.44 1600.0 1.04 10.57 18.63 e.28 .33 1.35 17.35 1700.0 1.05 10.55 7.26 1.24 .33 1.44 17.36 1800.0 1.10 10.44 e5.17 1.71 .33 1.50 17.35 1900.0 1.15 10.44 e17.67 2.12 .36 1.47 17.40 2000.0 1.19 10.35 e30.49 2.19 .36 1.36 17.37 (typical production unit @ +25 c ambient) linearization range: 500.0 to 2000.0 mhz s-parameters s 21 500.00 .077 e21.4 10.225 172.3 e16.048 e27.4 .145 e129.7 600.00 .047 e6.7 10.208 152.5 e16.347 e39.1 .167 e155.5 700.00 .021 e17.1 10.256 136.3 e16.996 e51.0 .175 e179.4 800.00 .005 e162.4 10.250 120.6 e17.395 e62.1 .181 164.4 900.00 .028 e146.3 10.342 105.9 e17.191 e74.7 .202 148.8 1000.00 .016 128.8 10.366 93.5 e17.447 e86.4 .213 136.1 1100.00 .013 29.1 10.281 80.8 e18.202 e98.1 .189 130.2 1200.00 .030 e15.7 10.203 67.6 e17.753 e110.3 .172 118.9 1300.00 .056 e31.8 10.218 54.3 e17.535 e120.5 .133 112.4 1400.00 .046 e50.1 10.320 41.3 e17.343 e132.6 .098 98.8 1500.00 .034 e75.0 10.310 28.1 e17.653 e143.1 .079 68.0 1600.00 .020 75.8 10.573 15.8 e17.464 e158.5 .088 36.1 1700.00 .066 63.7 10.470 2.5 e17.371 e169.5 .119 10.7 1800.00 .111 80.6 10.448 e11.6 e17.828 176.7 .102 11.4 1900.00 .136 78.5 10.362 e26.9 e18.291 163.0 .202 29.2 2000.00 .103 81.1 10.227 e40.9 e17.434 149.7 .233 62.2 bias = 15.00 volts frequency mhz mag ang db ang db ang mag ang s 11 s 22 s 12 free datasheet http:///
4 product options uto e 509r screening option
blank = no screening
r = r-series screening
for more information on r-series screening,
see reliability screening, pub. 5963-3240e. model number prefix
uto-
utm-
ppa- model number utc ?509-1 connector option
for tc-1 case the only connector option
available is the -1. the -1 option consists
of a sma female connector on both the
input and output (see note). model number prefix
utc- model number note: r-series screening is not available in the tc-1 case as the case is non-hermetic. case drawings to-8u .031 .031 .50
dia .450
dia max .175 .017 0. 185
0.015 +.002 - 001 .150
typ .300
typ ground case
ground v .150
typ 3 4 2 1 45 + rf in approximate weight 2.1 grams rf out glass ring
.060 dia typ
(3x) notes (unless otherwise specified): 1. dimensions are specified in inches 2. tolerances: xx .02 xxx .010 free datasheet http:///
gnd .350 .890 .460 .310 dc input .38
(2) pl .24 .19 sma jack (female)
(2) pl .180 .640 .905 .095 .250 .570 2-56 unc-2b x .15 deep
threaded insert
(4) pl .460 .310 .350 1.000 .820 product marking
area typical weight with connectors = 21.5 grams
rf .100 v + in rf out notes: 1. the tc-1 case is a non-hermetic case.
2. the only connector option available for the tc-1 case is the ?, sma female connectors at both input and output ports.
agc (if required) .890 .500 notes (unless otherwise specified): 1. dimensions are specified in inches 2. tolerances: xx .02 xxx .010 case drawings tc-1 contact teledyne cougar: 408-522-3838 408-522-3839 fax cougaramps@cougarcorp.com check for updates: www.teledyne-cougar.com free datasheet http:///
|
